Witura WT-1010C2 Manuel d'utilisateur télécharger pdf (Page 43)

101

USER MANUAL

5.17.7 Setting for Dialing a group of administrator numbers when PSTN/AC

failed or Auto Test

To program the unit to dial a certain group of numbers when PSTN/AC failed or Auto

Test, you can send the following SMS command to the unit.

Text Command:

*CALL#X

X stands for group number: 1 – 8

Example:

When *CALL#5 is applied, means it will dial the first 5 administrator numbers.

5.17.8 Changing the Login Password

It is possible to change the login password by sending the following SMS command.

Text Command:

*PAWO#XXXXXX

XXXXXX stands for 6 digits New Password

5.17.9 Permanent +V Output Facility

There is a permanent +V output when the WT-1010C2 is power on. This output is

available on the connection PIN8 and ground on the main board. The output voltage is

according to power supply used on WT-1010C2. It can be used to power on other

facility or device.

5.17.10 Reset the WT-1010C2

To reset the unit, you can send the following command by SMS to the unit.

Text Command:

*REST#XXXXXX

XXXXXX stands for 6 digits password based on *PAWO# (Default: 123456) and it

can be changed anytime.

WT1010C2 – USER MANUAL – Rev.2.7 – Technical Support : [email protected]

1 2 ... 38 39 40 41 42 43 44 45 46 47 48

Pas de commentaire

Witura WT-1010C2 Manuel d'utilisateur Page 43