Witura WT-1010C2 Manuel d'utilisateur télécharger pdf (Page 31)

101

USER MANUAL

When *PSOF#1 is applied, means it has +V output via PIN15 when PSTN failed.

When *PSOF#0 (Default) is applied, would mean turned off this function.

To enable this function, you would send *PSOF#1 SMS command to the unit.

Return Message

PSOF-ON

5.7.4 Turning the Audible Alarm On/Off for PSTN failure

The system has the function to sound the connected audible siren when PSTN failed.

This output is available on the connection PIN4 and ground on the main board. To turn

On/Off this function, you can send the following SMS command to the unit.

Text Command:

*PSTA#X

X stands for ON (1) or OFF (0) value

When *PSTA#1 is applied, means audible alarm will sound when PSTN failed.

When *PSTA#0 (Default) is applied, means audible alarm will not sound when PSTN

failed.

To turn on this function, you would send *PSTA#1 SMS command to the unit.

Return Message

PSTA-ON

5.8 “AC Failure” Settings

5.8.1 Enable/Disable the function of Dialing the programmable

Administrator/Central Station number when AC Failed

To program the unit to dial the programmed administrator/central station number

when AC failed, you can send the following SMS command to the unit.

Text Command:

*ACCA#X

X stands for ON (1) or OFF (0) value

When *ACCA#1 is applied, it will dial the administrator/central station number when

AC failed.

WT1010C2 – USER MANUAL – Rev.2.7 – Technical Support : [email protected]

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

Pas de commentaire

Witura WT-1010C2 Manuel d'utilisateur Page 31